SATO S84 ex - Page 169

4 Operation and Configuration
167
S84-ex/S86-ex Operator Manual
CALENDAR CASE FORMAT
Select the character format for the calendar.
• MIXED: Use upper case for the first character only.
• UPPER: Use upper case for all characters.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR CHECK
Enable or disable the calendar check function.
• ENABLE: Enable the calendar check function.
• DISABLE: Disable the calendar check function.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CHARACTER PITCH
Set the character width for printing.
• PROPORTIONAL: Print each character with a different width.
• FIXED: Print all characters with the same width.
PROTOCOL CODE
Set the protocol code.
• STANDARD: Use a standard code.
• NON-STANDARD: Use a non-standard code.
Note
To set the non-standard code, send the user download command <LD> in
normal mode. For more details on the <LD> command, refer to the
Programming Reference.