4 Operation and Configuration
166
S84-ex/S86-ex Operator Manual
CONFIRM CALENDAR
This is the screen to confirm calendar setting. If YES is selected, it goes to
the next screen after saving the value. If not, the product returns to the
DATE screen.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR DAY OF WEEK CODE
Set the day of the week code for the calendar.
The setting range is from 0 to 9, A to Z, and a to z.
The default value is 1-SUNDAY, 2-MONDAY, 3-TUESDAY,
4-WEDNESDAY, 5-THURSDAY, 6-FRIDAY, 7-SATURDAY.
Select the day using the
/ buttons, select the day of the week code
using the
/ buttons, then press the ENTER button to confirm the
day of week code.
Note
Shows only if YES is selected in the SET CALENDAR screen.
CALENDAR MONTH CODE
Set the month code for the calendar.
The setting range is from A to Z and a to z.
The default value is A-JANUARY, B-FEBRUARY, C-MARCH, D-APRIL,
E
-MAY, F-JUNE, G-JULY, H-AUGUST, J-SEPTEMBER, K-OCTOBER,
L-NOVEMBER, M-DECEMBER.
Select the month using the
/ buttons, select the month code using
the
/ buttons, then press the ENTER button to confirm the month
code.
Note
Shows only if YES is selected in the SET CALENDAR screen.
To Next Page
Loading...
