SATO S84 ex - Page 167

4 Operation and Configuration
165
S84-ex/S86-ex Operator Manual
HEAD DOT DENSITY
Toggle the head dot density from 12 dots/mm to 6 dots/mm and vice versa.
The following options are available:
• 100: Approximately four inches. Effective for S84-ex only.
• 150: Approximately six inches. Effective for S84-ex and S86-ex.
• 300: Approximately twelve inches. Effective for S84-ex and S86-ex.
Note
Shows only if the head dot density is 12 dots/mm and LEGACY
COMMAND SUPPORT is enabled. For details on the legacy command
support, refer to Section 9.3 About Legacy Command Support.
SET CALENDAR
Select whether or not to set the calendar.
• YES: Proceed to the calendar setting screen.
• NO: Proceed to the CHARACTER PITCH screen.
Note
Shows only if the calendar IC is installed.
DATE
Set the Year/Month/Date.
The setting range is from 81/01/01 (January 01, 1981) to 80/12/31
(December 31, 2080).
Note
Shows only if YES is selected in the SET CALENDAR screen.
TIME
Set the time in 24-hour format.
The setting range is from 00:00 to 23:59.
Note
Shows only if YES is selected in the SET CALENDAR screen.
KKPP