4 Operation and Configuration
164
S84-ex/S86-ex Operator Manual
ZERO SLASH
Set whether to print the number zero (0) with or without a slash (/).
• YES: Print zero with a slash.
• NO: Print zero without a slash.
AUTO ONLINE
Set the auto online function.
This function sets the product status at power on.
• YES: Start up the product in online mode.
• NO: Start up the product in offline mode.
PRINT OFFSET
When setting the print position in the vertical direction “V”:
Set the offset value with ‘+’ from the print reference position to move the
print position opposite the feed direction and value with ‘-’ to move the print
position in the feed direction.
When setting the print position in the horizontal direction “H”:
Set the offset value with ‘+’ from the print reference position to move to the
left side and value with ‘-’ to move to the right side of the product (when
facing the front of the product).
The setting range varies depending on the following models:
Model Name V (dot) H (dot)
S84-ex (203 dpi) ±0-9999 ±0-832
S84-ex (305 dpi) ±0-9999 ±0-1248
S84-ex (609 dpi) ±0-9999 ±0-2496
S86-ex (203 dpi) ±0-9999 ±0-1340
S86-ex (305 dpi) ±0-9999 ±0-2010
To Next Page
Loading...
