SATO S84 ex - Page 165

4 Operation and Configuration
163
S84-ex/S86-ex Operator Manual
DECIDE?
Select whether or not to confirm the input/output signal setting.
• YES: Proceed to the UPDATED SETTING screen.
• NO: Returns to the I/O SIGNAL SETTING screen.
UPDATED SETTING
This screen shows that the input/output signal setting has been updated.
Power on the product again to make the setting effective.
I/O SIGNALS INITIALIZE
Select whether or not to initialize the pin number for the input/output signal.
• YES: Proceed to the INITIALIZED SETTING screen.
• NO: Proceed to the ZERO SLASH screen.
Note
Refer to the default value of the pin number in INPUT SIGNAL/OUTPUT
SIGNAL.
INITIALIZED SETTING
This screen shows that the pin number for the input/output signal has been
initialized.
Power on the product again to make the setting effective.