SATO S84 ex - Page 181

4 Operation and Configuration
179
S84-ex/S86-ex Operator Manual
RFID LIFE COUNT
This screen shows the total accumulated number of RFID write from the
factory clear.
• SUCCESS shows the total number of write success.
• FAILURE shows the total number of write failure.
• TOTAL shows the total number of write success and write failure.
When the value of TOTAL exceeded 999999, all the values are cleared to
000000.
RFID COUNT
This screen shows the current RFID write numbers after the RFID counter
is cleared.
• SUCCESS shows the number of write success.
• FAILURE shows the number of write failure.
• TOTAL shows the total number of write success and write failure.
When the value of TOTAL exceeded 999999, all the values are cleared to
000000.
CLEAR RFID COUNT
Select whether or not to clear the current RFID counter.
• YES: Proceed to clear the RFID write numbers (SUCCESS, FAILURE
and TOTAL).
• NO: Do not clear the RFID counter.
Note
The total accumulated number of RFID write in the RFID LIFE COUNT is
not cleared.