To Next Page
K
Kyle ReedSep 4, 2025
What to do if my SATO Label Maker says 'Head Open'?
- AAmanda RamosSep 4, 2025
If the SATO Label Maker shows a 'Head Open' error, it means the print head is unlocked. Lock the print head to resolve this.
What to do if my SATO Label Maker says 'Head Open'?
If the SATO Label Maker shows a 'Head Open' error, it means the print head is unlocked. Lock the print head to resolve this.
What to do if my SATO Label Maker displays a 'Cover Open error'?
If the SATO Label Maker shows a 'Cover Open Error', it means the cover is opened. Close the cover to continue.
How to troubleshoot a 'Sensor Error' on a SATO Label Maker?
A 'Sensor Error' on your SATO Label Maker can occur due to: * An incorrect media sensor level; adjust the media sensor level. * An incorrect sensor type; ensure you are using the correct sensor type. * Meandering media; clean and adjust the media path.
What to do if my SATO Label Maker displays an 'SD card write error'?
An 'SD Card Write Error' on your SATO Label Maker can be caused by several factors: * The SD card is not connected or not correctly connected; ensure it is properly connected. * The SD card is disconnected while writing; keep it connected during writing. * The SD card read/write fails; replace the SD card. * The SD card is not formatted; format the SD card in memory mode. * The SD card is write-protected; release the write-protect.
What causes a 'Download data error' on a SATO Label Maker?
If your SATO Label Maker displays a 'Download Data Error', it indicates that the downloaded data is incorrect. Check the downloaded data and ensure the download area is sufficient by checking the downloaded data size.
What does 'Print Head Error' mean on my SATO Label Maker?
A 'Print Head Error' on your SATO Label Maker may occur if the print elements are worn out. Change print head check conditions to only check for missing elements in barcodes and try to adjust missing elements to white bars.
General| Color | - |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 203 x 203 DPI |
| Minimum print length | 2500 mm |
| Maximum printing width | 104 mm |
| Flash memory | 48 MB |
| Internal memory | 64 MB |
| Display | LCD |
| Product color | Black |
| USB port | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | 15 - 90 °C |
| Operating temperature (T-T) | -5 - 40 °C |
| Storage relative humidity (H-H) | -20 - 60 % |
| Operating relative humidity (H-H) | 15 - 85 % |
| Media thickness | 0.05 - 0.31 mm |
Weight and Dimensions| Depth | 408 mm |
|---|---|
| Width | 245 mm |
| Height | 300 mm |
| Weight | 13700 g |
