SEW-Eurodrive MOVISAFE DCS21B

30
Manual – MOVIDRIVE® MDX61B Safety Module Option MOVISAFE® DCS..B
4
Nameplates
Unit Structure
– Emergency stop monitoring
• Position monitoring:
– Position range monitoring
– Travel range monitoring
– Target position monitoring
• 8 safe digital inputs
• 3 × 2 safe digital outputs
• 2 pulse outputs for crossfault monitoring of digital input signals
• Encoder interface: SSI / HTL incremental / TTL incremental / SIN/COS
• Diagnostics and configuration interface
• Function block diagram oriented programming with up to 500 instruction lists
4.1.4 DCS32B
• Speed monitoring:
– Speed monitoring
– Direction monitoring
– Emergency stop monitoring
• 8 safe digital inputs
• 3 × 2 safe digital outputs
• 2 pulse outputs for crossfault monitoring of digital input signals
• Encoder interface: SSI / HTL incremental / TTL incremental / SIN/COS
• Diagnostics and configuration interface
• Function block diagram oriented programming with up to 500 instruction lists
4.2 Nameplates
MOVIDRIVE
®
MDX61B with installed DCS..B option is supplied with two nameplates.
4.2.1 1st nameplate: DCS..B
• The first nameplate (see following figure) is attached to the contact spring strip of the
DCS..B option. It contains the following data:
– Part number (Sachnr:)
– Serial number (Sernr:)
– Version (Baust:)
8411716491