Manual – MOVIDRIVE® MDX61B Safety Module Option MOVISAFE® DCS..B
87
6
Fieldbus connection via PROFIsafe
Startup
6.7 Fieldbus connection via PROFIsafe
Using the MOVISAFE
®
Assist parameter setting software lets you read PROFIsafe pa-
rameters and the PROFIsafe status during operation of the DCS12B option.
6.7.1 Diagnostics of the PROFIsafe communication status
The PROFIsafe status can be read via [Process diagnostics] / [Safety bus] / [PROFIsafe]
/ [DiagPROFIsafe] (see below figure).
INFORMATION
Refer to the following publications for additional information:
•"MOVIDRIVE
®
MDX61B Fieldbus Interface DFS12B PROFIBUS DP-V1 with
PROFIsafe" manual
•"MOVIDRIVE
®
MDX61B Fieldbus Interface DFS22B PROFINET IO with
PROFIsafe" manual
9007201239046411
To Next Page
Loading...