53
8024638/AE00/V1-0/2019-09| SICK S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
REPAIRS 5
▸ Disconnect the plug from the FAN slot.
Fig. 60: Electronic unit, bottom plug connections
3 Remove the red cover cap
Fig. 61: Door fan
4 Disconnect leads individually:
1 Press the push button.
2 Pull the lead out.
Fig. 62: Door fan, detail
5 Remove the fan:
1 Open the bayonet lock by turning the complete fan.
2 Remove the fan.
6 Insert new fan.
1 ELECTRONIC (electronics power supply)
2 FAN (housing fan power supply)
3Grounding
4 CELL (cell)
5 DEVICE (sender/receiver unit)
1Push button
2 Flow direction, arrow marking
Observe flow direction when inserting. Here: In the cabinet (see Fig. 62 “Door fan,
detail”, page 53).
To Next Page
Loading...
