SICK MCS200HW - Page 97

97
8024638/AE00/V1-0/2019-09| SICK S E R V I C E M A N U A L | MCS200HW
Subject to change without notice
REPAIRS 5
Fig. 143: Sender/receiver unit, sheet metal covers 4 and 5
17 Remove sheet metal cover 5.
1 Loosen the fastening screws with a Phillips screwdriver (2 pieces).
2 Take off sheet metal cover 5.
Fig. 144: Sender/receiver unit, sheet metal cover 5, open
18 Pull sheet metal cover 1 with foam insulation out to the side.
1 Fastening screw, sheet metal cover 5
2 Fastening screw, sheet metal cover 4
3 Sheet metal cover 4
Keep the sleeves for reassembly.
1 Sheet metal cover 1
2 Fitting position, sleeves
3Sleeve
4 Foam insulation