Summary of Programming Codes
173
Summary of Programming Codes
Start the Programming Mode: or
g
Password: 31994 + Code
*
9 5
Programmed Function Code Default Settings
Main ConfigurationsÆ page 17
Dialing Mode on an External Analog LineÆ page 17 19 2 (MF) for analog lines
Default Access to a Group of External
LinesÆ page 17
002 0 for all extensions
Analog Line AttendantsÆ page 18 42 None
Speed DialingÆ page 20 12 All slots are empty
Denied ListÆ page 21 23 Default Permission and
Denied ListsÆ page 24
Permission ListsÆ page 22 24
Permission for using the numbers in the Speed
Dialing phonebook without a COS
review.Æ page 25
072 # (disabled)
Assigning a Class Of Service (COS)Æ page 25 11 77 (for all extensions)
COS ChangeoverÆ page 26 78 # (blocked)
LanguageÆ page 27 64 3 (for all systems)
Country/Group of CountriesÆ page 27 65 01(Brazil)
Attendant Console (AC)Æ page 30 50 None
Warning Tone for Calls without LCRÆ page 31 092 # (disabled)
Programming an External LineÆ page 31
Groups of external linesÆ page 31 56 0 (access to all lines)
Overflow for a Group of External LinesÆ page 32 099 None
Configuring Priority by Type of External
LineÆ page 32
94 1 (standalone)
Protocol for Seizing an External Analog
LineÆ page 32
017 2 - Canada
1 - Other countries
Caller ID (CLIP) on an Analog LineÆ page 33 005 Depending on the country
External Line Call DirectionÆ page 35 55 1 - bidirectional
Flash DurationÆ page 35 18 Depending on the code
"19" and "65"
Reseizure Time for an External LineÆ page 36 29 1 (0.5 seconds)
Maximum time between rings for an incoming
callÆ page 36
17 13 - Argentina
06 - Other countries
Coefficient for an External Analog LineÆ page 37 47 1 (for all lines)
To Next Page
Loading...
