Siemens HiPath 1130 - E 821 ST System telephone; Status indication keys

Step by Step
Main Configurations
22
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or or Enter the Denied List number you want to delete.
... Enter the list entry of the number to be denied access.
Enter the number that will be denied access (up to 10
digits).
Warning: Enter the number without the external access
code.
Wait 5 seconds Wait for a confirmation tone.
Initial state for Programming Mode.
Deleting Numbers from the Denied List
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
or or Enter the Denied List number you want to delete.
... Enter the list entry number of the number to be delet-
ed.
Wait 5 seconds If no new number is entered after 5 seconds, the
content of that entry is removed.
Initial state for Programming Mode.
Permission Lists
There are three Permission Lists that can be configured
with different telephone numbers and individual exten-
sion prefix combinations (enter the number without the
external access code).
• Permission List 1 (COS 4) with 4 entries
• Permission List 2 (COS 5) with 10 entries
• Permission List 3 (COS 6) with 25 entries
2 3
1 2 3
0 1 3 5
To change a blocked number simply enter its list
entry number and the new number.
2 3
1 2 3
0 1 3 5