Siemens MC55 - AT+CLCK Facility Lock

MC55 AT Command Set
5.4 AT+CLCK
s
m obil e
MC55_ATC_V01.05 Page 115 of 469 2/10/04
Confidential / Released
5.4 AT+CLCK Facility lock
Syntax
Command Description
The Test command returns the supported parameters.
Use this command to lock, unlock or interrogate a network or ME
<facility>. The command can be aborted
when network facilities are being set or interrogated.
Test Command
AT+CLCK=?
Response(s)
+CLCK:list of supported <facility>s
OK
Write Command
AT+CLCK=<facility>, <mode>[, <password>][, <class>]
Response(s)
if <mode> is not equal 2 and command successful:
OK
if <mode>= 2 and command successful:
+CLCK: <status>, <class>
[+CLCK: <status>, <class> ]
[+CLCK: ...]
OK
If error is related to ME functionality
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07, GSM 02.04, GSM 02.88,
GSM 03.88, GSM 04.88