Siemens MC55 - AT^SGCONF Configuration of GPRS Related Parameters

MC55 AT Command Set
10.13 AT^SGCONF
s
m obil e
MC55_ATC_V01.05 Page 269 of 469 2/10/04
Confidential / Released
10.13 AT^SGCONF Configuration of GPRS related Parameters
Syntax
Parameter Description
LLC-PDU-length
0 no negotiation with network (500 will be used)
140...1520
(P)
lower values diminish performance
GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR:
operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test
command.
Test Command
AT^SGCONF=?
Response(s)
^SGCONF: (list of supported <llc_pdu_length>s), (list of supported <class>es)
OK
Read Command
AT^SGCONF?
Response(s)
^SGCONF: <llc_pdu_length>, <class>
OK
Write Command
AT^SGCONF=[<llc_pdu_length>] [, <class>]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
<llc_pdu_length>
(num)
<class>
(num)