Siemens MC55 - AT+CRC Set Cellular Result Codes for Incoming Call Indication

MC55 AT Command Set
7.25 AT+CRC
s
m obil e
MC55_ATC_V01.05 Page 178 of 469 2/10/04
Confidential / Released
7.25 AT+CRC Set Cellular Result Codes for incoming call indication
Syntax
Unsolicited Result Code
When enabled, an incoming call is indicated to the TE with unsolicited result code +CRING: <type> instead of
the normal RING.
+CRING: <type>
Command Description
The command controls whether or not the extended format of incoming call indication is used.
Parameter Description
[0]
(&F)
disable extended format
1 enable extended format
Test Command
AT+CRC=?
Response(s)
+CRC: (list of supported<mode>s)
OK
Read Command
AT+CRC?
Response(s)
+CRC: <mode>
OK
Write Command
AT+CRC=[<mode>]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07
<mode>
(num)(&W)(&V)