Siemens MC55 - AT Command Settings Storable with AT&W; Table 19.4: Settings Stored to User Profile on ASC0; MUX Channel 1

MC55 AT Command Set
19.4 AT Command Settings storable with AT&W
s
m obil e
MC55_ATC_V01.05 Page 455 of 469 2/10/04
Confidential / Released
19.4 AT Command Settings storable with AT&W
Table 19.4: Settings Stored to User Profile on ASC0 / MUX Channel 1
AT Command Stored parameters
Configuration Commands
ATQ <n>
ATV <value>
ATX <value>
AT+CMEE <n>
Status Control Commands
ATS18 <n>
Serial Interface Control Commands
AT\Q <n>
AT&C <value>
AT&D <value>
AT&S <value>
ATE <value>
AT+ILRR <value>
Call related Commands
ATS0 <n>
ATS6 <n>
ATS7 <n>
ATS8 <n>
ATS10 <n>
AT+CBST <speed>, <name>, <ce>
AT+CRLP <iws>, <mws>, <T1>, <N2>
AT^SLCC <n>
AT+CR <mode>
AT+CRC <mode>
Network Service Commands
AT+COPS <format>
AT+CREG <n>
Supplementary Service Commands
AT^SACM <n>