Siemens MC55 - AT+CMSS Send SMS Messages from Storage

MC55 AT Command Set
12.9 AT+CMSS
s
m obil e
MC55_ATC_V01.05 Page 327 of 469 2/10/04
Confidential / Released
12.9 AT+CMSS Send SMS messages from storage
Syntax
Command Description
The write command sends message with location value <index> from message storage <mem2> to the network
(SMS-SUBMIT or SMS-COMMAND). If new recipient address
<da> is given for SMS-SUBMIT, it shall be used
instead of the one stored with the message. Reference value
<mr> is returned to the TE on successful message
delivery. Value can be used to identify message upon unsolicited delivery status report result code.
If the optional parameter
<da> is given, the old status of the short message at <index> remains unchanged
(see
<stat>).
Test Command
AT+CMSS=?
Response(s)
OK
Write Command
If text mode (AT+CMGF=1):
AT+CMSS=<index> [, <da>[, <toda>]]
Response(s)
+CMSS: <mr>[, <scts>]
OK
If sending fails
ERROR
+CMS ERROR
Write Command
If PDU mode (AT+CMGF=0):
AT+CMSS=<index> [, <da>[, <toda>]]
Response(s)
+CMSS: <mr>[, <ackpdu>]
OK
If sending fails
ERROR
+CMS ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.05