Siemens MC55 - AT^SSCONF SMS Configuration

MC55 AT Command Set
12.22 AT^SSCONF
s
m obil e
MC55_ATC_V01.05 Page 351 of 469 2/10/04
Confidential / Released
12.22 AT^SSCONF SMS Configuration
Syntax
Command Description
The write command servies to control the presentation of the recipient address parameters <ra> and <tora>.
Parameter Description
display recipient address
[0]
(&F)
the mobile station shall not display the parameter <ra> and <tora>
1 the mobile station shall display the parameter
<ra> and <tora>.
Notes
• The parameters <ra> and <tora> appear in the result codes of the AT commands AT+CMGL, AT^SMGL,
AT+CMGR, AT^SMGR and the unsolicited result code .
Test Command
AT^SSCONF=?
Response(s)
^SSCONF:list of supported <ra>s
OK
Read Command
AT^SSCONF?
Response(s)
^SSCONF:<ra>
OK
Write Command
AT^SSCONF=<ra>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
<ra>
(num)