MC55 AT Command Set
11.26 AT+FTM
s
m
obil
e
MC55_ATC_V01.05 Page 309 of 469 2/10/04
Confidential / Released
11.26 AT+FTM Transmit Data
Syntax
Command Description
This command causes the TA to transmit data using the modulation mode defined below. An ERROR response
code results if this command is issued while the modem is on-hook.
Notes
• Used for Fax Class 1 only
•
<mod>= 3 is not possible
Test Command
AT+FTM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FTM=<mod>
Response(s)
CONNECT
If error is related to ME functionality
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
TIA/EIA-578
To Next Page
Loading...
