Siemens MC55 - AT+CGPADDR Show PDP Address

MC55 AT Command Set
10.7 AT+CGPADDR
s
m obil e
MC55_ATC_V01.05 Page 255 of 469 2/10/04
Confidential / Released
10.7 AT+CGPADDR Show PDP address
Syntax
Command Description
The test command returns a list of defined <cid>s.
The write command returns a list of PDP addresses for the specified context identifiers.
Parameter Description
a numeric parameter which specifies a particular PDP context definition (see AT+CGDCONT command).
a string that identifies the MT in the address space applicable to the PDP. The address may be static or dynamic.
Note
• If no <cid> is specified, the write command will return a list of all defined contexts.
Test Command
AT+CGPADDR=?
Response(s)
+CGPADDR: (list of supported <cid>s)
OK
Write Command
AT+CGPADDR=[<cid>[<cid>[... ]]]
Response(s)
+CGPADDR: <cid>, <PDP_address>
+CGPADDR: ...
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
<cid>
(num)
<PDP_address>
(str)