MC55 AT Command Set
11.23 AT+FRM
s
m
obil
e
MC55_ATC_V01.05 Page 306 of 469 2/10/04
Confidential / Released
11.23 AT+FRM Receive Data
Syntax
Command Description
This command causes the TA to enter the receiver-mode using the modulation defined below. An ERROR
response code results if this command is issued while the modem is on-hook.
Notes
• Used for Fax Class 1 only
•
<mod>= 3 is not possible
Test Command
AT+FRM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FRM=<mod>
Response(s)
CONNECT
If error is related to ME functionality:
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
TIA/EIA-578
To Next Page
Loading...
