Siemens MC55 - AT^SMONG GPRS Monitor

MC55 AT Command Set
8.8 AT^SMONG
s
m obil e
MC55_ATC_V01.05 Page 203 of 469 2/10/04
Confidential / Released
8.8 AT^SMONG GPRS Monitor
Syntax
Command Description
The execute command can be used to retrieve GPRS specific cell information directly on request. The cell data
will be output only once on a single line.
The write command can be used to retrieve GPRS specific cell information directly on request or automatically
every n seconds. To stop the presentation type "at" or "AT".
Parameter Description
1 Cell Info Table
Test Command
AT^SMONG=?
Response(s)
^SMONG:(list of supported <table>s), (list of supported <period>s)
OK
Exec Command
AT^SMONG
Response(s)
GPRS Monitor
Cell Info Table (see: 8.8.1)
OK
Write Command
AT^SMONG=<table> [, <period>]
Response(s)
^SMONG: GPRS Monitor
Cell Info Table (see: 8.8.1)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
SIEMENS
<table>
(num)