Siemens MC55 - AT+CRLP Select Radio Link Protocol Param. for Orig. Non-Transparent Data Call

MC55 AT Command Set
7.21 AT+CRLP
s
m obil e
MC55_ATC_V01.05 Page 165 of 469 2/10/04
Confidential / Released
7.21 AT+CRLP Select radio link protocol param. for orig. non-trans-
parent data call
Syntax
Command Description
Read command returns current settings for the supported RLP version 0.
The Write command sets radio link protocol (RLP) parameters used when non-transparent data calls are origi-
nated.
Parameter Description
Interworking window size (IWF to MS)
0...[10]...61
(&F)
Test Command
AT+CRLP=?
Response(s)
+CRLP: (list of supported<iws>s), (list of supported<mws>s), (list of supported<T1>s), (list of
supported
<N2>s)
OK
Read Command
AT+CRLP?
Response(s)
+CRLP: <iws>, <mws>, <T1>, <N2>[, <verx>]
OK
Write Command
AT+CRLP=[<iws>[, <mws>[, <T1>[, <N2>]]]]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
GSM 07.07
<iws>
(num)(&W)(&V)