Siemens MC55 - ATS4 Set Response Formatting Character

MC55 AT Command Set
18.3 ATS4
s
m obil e
MC55_ATC_V01.05 Page 441 of 469 2/10/04
Confidential / Released
18.3 ATS4 Set response formatting character
Syntax
Command Description
This parameter setting determines the character generated by the TA for result code and information text.
Parameter Description
response formatting character
000...10
(&F)
...127
Read Command
ATS4?
Response(s)
<n>
OK
Write Command
ATS4=<n>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
V.25ter
<n>
(num)(&W)(&V)