MC55 AT Command Set
10.14 ATA
s
m
obil
e
MC55_ATC_V01.05 Page 271 of 469 2/10/04
Confidential / Released
10.14 ATA Manual response to a network request for PDP context acti-
vation
Syntax
Command Description
The V.25ter ATA command may be used to accept a network request for a PDP context activation announced
by the unsolicited result codes RING or "
+CRING: GPRS". The MT responds with CONNECT, enters V.25ter
online data state and follows the same procedure as it would after having received a
AT+CGANS=1 with no <L2P>
or <cid> values specified.
If you try to answer a request which is no longer present or which is already answered by another instance, NO
CARRIER is returned.
Exec Command
ATA
Response(s)
CONNECT
NO CARRIER
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
To Next Page
Loading...
