MC55 AT Command Set
11.9 AT+FDCC
s
m
obil
e
MC55_ATC_V01.05 Page 292 of 469 2/10/04
Confidential / Released
11.9 AT+FDCC Query or set capabilities
Syntax
Command Description
This command allows the connected application to sense and constrain the capabilities of the facsimile DCE
(=ME), from the choices defined in CCITT T.30 Table 2.
Notes
• For further information see AT+FDIS.
• Used for Fax Class 2 only
Test Command
AT+FDCC=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of
<st>s)
OK
Read Command
AT+FDCC?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
OK
Write Command
AT+FDCC=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
To Next Page
Loading...
