Siemens MC55 - AT+CLIR Calling Line Identification Restriction

MC55 AT Command Set
9.10 AT+CLIR
s
m obil e
MC55_ATC_V01.05 Page 235 of 469 2/10/04
Confidential / Released
9.10 AT+CLIR Calling line identification restriction
Syntax
Command Description
This command refers to the GSM supplementary service CLIR (Calling Line Identification Restriction).
Parameter Description
Parameter shows the settings for outgoing calls:
[0]
(P)
Presentation indicator is used according to the subscription of the CLIR service
1 CLIR invocation
2 CLIR suppression
Test Command
AT+CLIR=?
Response(s)
+CLIR: (list of supported <n>s)
OK
Read Command
AT+CLIR?
Response(s)
+CLIR<n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIR=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
<n>
(num)