Siemens MC55 - AT^SCFG Extended Configuration Setting

MC55 AT Command Set
2.13 AT^SCFG
s
m obil e
MC55_ATC_V01.05 Page 54 of 469 2/10/04
Confidential / Released
2.13 AT^SCFG Extended Configuration Setting
Command can be used to query and set various ME parameters.
Parameter names are coded in GSM alphabet, parameter values in the alphabet as specified by
AT+CSCS (GSM
or UCS2).
Syntax
Test Command
AT^SCFG=?
Response(s)
^SCFG: "Audio/AMR", (list of supported <amr>s)
^SCFG: "GPRS/ATS0/withAttach", (list of supported <gaa>s)
^SCFG: "GPRS/RingOnIncomingData", (list of supported <groid>s)
^SCFG: "PowerSaver/Mode9/Timeout", (list of supported <cfun9-timeout>s)
^SCFG: "Radio/Band/HandOver", (list of supported <HandOverStatus>s)
^SCFG: "URC/CallStatus/CIEV", (list of supported <succ>s)
^SCFG: "URC/CallStatus/SLCC", (list of supported <sucs>s)
^SCFG: "URC/Datamode/Ringline", (list of supported <udri>s)
^SCFG: "URC/Ringline", (list of supported <uri>s)
^SCFG: "URC/Ringline/ActiveTime", (list of supported <urat>s)
OK
Read Command
AT^SCFG?
Response(s)
^SCFG: "Audio/AMR", <amr>
1
[, <amr>
2
[, <amr>
3
...[<amr>
10
]]]
^SCFG: "GPRS/ATS0/withAttach", <gaa>
^SCFG: "GPRS/RingOnIncomingData", <groid>
^SCFG: "PowerSaver/Mode9/Timeout", (list of supported <cfun9-timeout>s)
^SCFG: "Radio/Band/HandOver", <HandOverStatus>
^SCFG: "URC/CallStatus/CIEV", <succ>
^SCFG: "URC/CallStatus/SLCC", <sucs>
^SCFG: "URC/Datamode/Ringline", <udri>
^SCFG: "URC/Ringline", <uri>
^SCFG: "URC/Ringline/ActiveTime", <urat>
OK
Write Command
Adaptive Multi Rate (AMR):
AT^SCFG="Audio/AMR"[, <amr>]
Response(s)
^SCFG: "Audio/AMR", <amr>
1
[, <amr>
2
[, <amr>
3
...[<amr>
10
]]]
OK
ERROR
+CME ERROR: operation temporary not allowed