Siemens MC55 - AT^SALS Alternate Line Service

MC55 AT Command Set
8.9 AT^SALS
s
m obil e
MC55_ATC_V01.05 Page 205 of 469 2/10/04
Confidential / Released
8.9 AT^SALS Alternate Line Service
The AT^SALS command is designed to support Alternate Line Service. This allows the subscriber to use two
voice numbers on the same SIM card (service requires a dual line SIM card).
Syntax
Unsolicited Result Code
If switched on with <view>=1:
^SALS: <line>
Indicates the line used by an incoming call.
Command Description
The read command returns the presentation mode of <view> and the currently selected <line>.
Test Command
AT^SALS=?
Response(s)
^SALS:(list of supported <view>s), (list of supported <line>s)
OK
Read Command
AT^SALS?
Response(s)
^SALS: <view>, <line>
OK
ERROR
Write Command
AT^SALS=<view> [, <line>]
Response(s)
OK
ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
SIEMENS