Siemens MC55 - 17 Hardware Related Commands; AT+CALA Set Alarm Time

MC55 AT Command Set
17. Hardware related Commands
s
m obil e
MC55_ATC_V01.05 Page 425 of 469 2/10/04
Confidential / Released
17. Hardware related Commands
The AT Commands described in this chapter are related to the MC55's hardware interface. More information
regarding this interface is available with the "MC55 Hardware Interface Description"[2].
17.1 AT+CALA Set alarm time
Syntax
Test Command
AT+CALA=?
Response(s)
+CALA: (list of supported<n>s), (list of supported<type>s), (list of supported<tlength>s)
OK
ERROR
+CME ERROR: <err>
Read Command
AT+CALA?
Response(s)
+CALA: <time>[, <n>[, <type>[, <text>]]]
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CALA=<time>[, <n>[, <type>[, <text>]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07