Siemens MC55 - AT+CPMS Preferred SMS Message Storage

MC55 AT Command Set
12.12 AT+CPMS
s
m obil e
MC55_ATC_V01.05 Page 334 of 469 2/10/04
Confidential / Released
12.12 AT+CPMS Preferred SMS message storage
Syntax
Command Description
The write command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing, etc.
Parameter Description
Number of messages currently in <mem1>
Test Command
AT+CPMS=?
Response(s)
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of supported <mem3>s)
OK
Read Command
AT+CPMS?
Response(s)
+CPMS: <mem1>, <used1>, <total1>, <mem2>, <used2>, <total2>, <mem3>, <used3>, <total3>
OK
ERROR
ERROR
+CMS ERROR
Write Command
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
Response(s)
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
OK
ERROR
ERROR
+CMS ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.05
<used1>
(num)