MC55 AT Command Set
11.25 AT+FTH
s
m
obil
e
MC55_ATC_V01.05 Page 308 of 469 2/10/04
Confidential / Released
11.25 AT+FTH Transmit Data Using HDLC Framing
Syntax
Command Description
This command causes the TA to transmit data using HDLC protocol and the modulation mode defined below. An
ERROR response code results if this command is issued while the modem is on-hook
Notes
• Used for Fax Class 1 only
•Only
<mod>= 3 is possible
Write Command
AT+FTH=<mod>
Response(s)
CONNECT
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
TIA/EIA-578
To Next Page
Loading...
