MC55 AT Command Set
11.7 AT+FCQ
s
m
obil
e
MC55_ATC_V01.05 Page 290 of 469 2/10/04
Confidential / Released
11.7 AT+FCQ Copy Quality Checking
Syntax
Command Description
This command controls Copy Quality checking when receiving a fax.
Parameter Description
0 No copy quality checking. The ME will generate Copy Quality OK (MCF)
responses to complete pages.
[1] ME can check 1-D phase data. The connected application must check copy
quality for 2-D phase C data.
Note
• Used for Fax Class 2 only
Test Command
AT+FCQ=?
Response(s)
(list of supported copy quality checking <cq>s)
OK
Read Command
AT+FCQ?
Response(s)
<cq>
OK
Write Command
AT+FCQ=<cq>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
<cq>
(num)
To Next Page
Loading...
