MC55 AT Command Set
11.11 AT+FDIS
s
m
obil
e
MC55_ATC_V01.05 Page 294 of 469 2/10/04
Confidential / Released
11.11 AT+FDIS Query or set session parameters
Syntax
Command Description
This command allows the controlling application to sense and constrain the capabilities used for the current ses-
sion. It uses
AT+FDIS to generate DIS or DTC messages directly, and uses AT+FDIS and received DIS mes-
sages to generate DCS messages.
Note
• Used for Fax Class 2 only
Test Command
AT+FDIS=?
Response(s)
(list of <vr>s), (list of <br>s), (list of <wd>s), (list of <ln>s), (list of <df>s), (list of <ec>s), (list of <bf>s),
(list of
<st>s)
OK
Read Command
AT+FDIS?
Response(s)
<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
OK
Write Command
AT+FDIS=<vr>, <br>, <wd>, <ln>, <df>, <ec>, <bf>, <st>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
To Next Page
Loading...
