Siemens MC55 - AT+CLVL Loudspeaker Volume Level

MC55 AT Command Set
16.4 AT+CLVL
s
m obil e
MC55_ATC_V01.05 Page 395 of 469 2/10/04
Confidential / Released
16.4 AT+CLVL Loudspeaker volume level
Syntax
Parameter Description
Loudspeaker Volume Level
0...4
(D)
Notes
• The write command can only be used in audio mode 2 - 6.
• The values of the volume steps are specified with the parameters
<outCalibrate>[0],...<outCali-
brate>
[4] of the AT^SNFO command.
Test Command
AT+CLVL=?
Response(s)
+CLVL: (list of supported<level>s)
OK
Read Command
AT+CLVL?
Response(s)
+CLVL: <level>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLVL=<level>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07
<level>
(num)