Siemens MC55 - Page 396

MC55 AT Command Set
16.4 AT+CLVL
s
m obil e
MC55_ATC_V01.05 Page 396 of 469 2/10/04
Confidential / Released
• As an alternative to AT+CLVL, you can use AT^SNFO and AT^SNFV. The parameter <level> is identical with
<outStep> used by both commands.
• Any change to
<level> (or <outStep>) takes effect in audio modes 2 to 6. That is, when you change
<level> (or <outStep>) and then select another mode with AT^SNFS, the same step will be applied.
The only exception is audio mode 1 which is fixed to
<level>=4 (or accordingly <outStep>=4).
•
<level> (or <outStep>) is stored non-volatile when the ME is powered down with AT^SMSO or reset with
AT+CFUN=1,1.