Siemens MC55 - AT+CPAS Mobile Equipment Activity Status

MC55 AT Command Set
3.6 AT+CPAS
s
m obil e
MC55_ATC_V01.05 Page 87 of 469 2/10/04
Confidential / Released
3.6 AT+CPAS Mobile equipment activity status
Syntax
Command Description
TA returns the activity status of ME.
Parameter Description
0 ready
3 incoming call (ringing)
4 call in progress or call hold
Test Command
AT+CPAS=?
Response(s)
+CPAS: (list of supported<pas>s)
OK
Exec Command
AT+CPAS
Response(s)
+CPAS: <pas>
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
GSM 07.07
<pas>
(num)