Siemens MC55 - AT+CLIP Calling Line Identification Presentation

MC55 AT Command Set
9.9 AT+CLIP
s
m obil e
MC55_ATC_V01.05 Page 233 of 469 2/10/04
Confidential / Released
9.9 AT+CLIP Calling line identification presentation
Syntax
Unsolicited Result Codes
URC 1
Voice call response format:
+CLIP: <number>, <type>, , , , <CLI validity>
URC 2
Data/FAX call response format:
+CLIP: <number>, <type>
When CLIP is enabled at the TE (and is permitted by the calling subscriber), an unsolicited result code is
returned after every RING (or +CRING:
<type>) at a mobile terminating call.
Test Command
AT+CLIP=?
Response(s)
+CLIP: (list of supported<n>s)
OK
Read Command
AT+CLIP?
Response(s)
+CLIP: <n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIP=<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
§ % % % % %
Reference(s)
GSM 07.07