Siemens MC55 - AT^SDLD Delete the Last Number Redial Memory

MC55 AT Command Set
15.9 AT^SDLD
s
m obil e
MC55_ATC_V01.05 Page 391 of 469 2/10/04
Confidential / Released
15.9 AT^SDLD Delete the 'last number redial' memory
Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds depend-
ing on the SIM used. While the read process is in progress, an attempt to use any of the phonebook commands
will result in "+CME Error: 14" (SIM busy).
Syntax
Command Description
The execute command deletes all numbers stored in the LD memory.
Test Command
AT^SDLD=?
Response(s)
OK
Exec Command
AT^SDLD
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
SIEMENS