Siemens MC55 - AT^SSTR SAT Response

MC55 AT Command Set
14.4 AT^SSTR
s
m obil e
MC55_ATC_V01.05 Page 368 of 469 2/10/04
Confidential / Released
14.4 AT^SSTR SAT Response
The TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Com-
mand has been executed.
AT^SSTR will also provide any user information, e.g. a selected menu item.
Syntax
Parameter Description
MC55 Remote-SAT interface states
0 RESET
1OFF
2IDLE
3PAC
4WAIT
Test Command
AT^SSTR=?
Response(s)
^SSTR:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read Command
AT^SSTR?
Response(s)
^SSTR: <state>, <cmdType>
OK
Write Command
AT^SSTR=<cmdType>, <status>[, <inputNumber>][, <inputString>]
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
<state>
(num)