Siemens MC55 - AT+FOPT Set Bit Order Independently

MC55 AT Command Set
11.19 AT+FOPT
s
m obil e
MC55_ATC_V01.05 Page 302 of 469 2/10/04
Confidential / Released
11.19 AT+FOPT Set bit order independently
Syntax
Command Description
Model specific command to set bit order independently of the understanding which is "mirrored" and which is
direct.
Parameter Description
0 non-standard
1 standard
Note
• Used for Fax Class 2 only
Write Command
AT+FOPT=<opt>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
SIEMENS
<opt>
(num)