Siemens MC55 - AT^SNFW Write Audio Setting in Non-Volatile Store

MC55 AT Command Set
16.18 AT^SNFW
s
m obil e
MC55_ATC_V01.05 Page 421 of 469 2/10/04
Confidential / Released
16.18 AT^SNFW Write audio setting in non-volatile store
Syntax
Command Description
TA writes the active audio parameters in non-volatile store related to the active mode.
Notes
• Execute command works only in audio mode 2 to 6.
• TA writes the following audio parameter values in non-volatile store:
AT^SNFI: <inBbcGain>, <inCalibrate>
AT^SNFO: <outBbcGain>, <outCalibrate>[0 to 4], <sideTone>
AT^SNFS: <audMode>
AT^SAIC: <io>, <mic>, <ep>.
Test Command
AT^SNFW=?
Response(s)
OK
Exec Command
AT^SNFW
Response(s)
OK
ERROR
CME ERROR: <err>
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS