Siemens MC55 - 8 Network Service Commands; AT+COPN Read Operator Names

MC55 AT Command Set
8. Network Service Commands
s
m obil e
MC55_ATC_V01.05 Page 186 of 469 2/10/04
Confidential / Released
8. Network Service Commands
The AT Commands described in this chapter are related to various network services. More Commands related
to this area can be found at the chapter "Supplementary Service Commands".
8.1 AT+COPN Read operator names
Syntax
Command Description
TA returns the list of operator names from the ME. Each operator code <numericn> that has an alphanumeric
equivalent
<alphan> in the ME memory is returned. See also: AT^SPLM.
Parameter Description
Operator in numeric form; GSM location area identification number.
Operator in long alphanumeric format; can contain up to 16 characters.
Test Command
AT+COPN=?
Response(s)
OK
Exec Command
AT+COPN
Response(s)
+COPN: <numericn>, <alphan>
+COPN: ...
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
<numericn>
(str)
<alphan>
(str)