MC55 AT Command Set
11.8 AT+FCR
s
m
obil
e
MC55_ATC_V01.05 Page 291 of 469 2/10/04
Confidential / Released
11.8 AT+FCR Capability to receive
Syntax
Parameter Description
[0] ME will not receive message data. This can be used when the application has
insufficient storage. The ME can send and can be polled for a file.
1 ME can receive message data.
Note
• Used for Fax Class 2 only
Write Command
AT+FCR=<cr>
Response(s)
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % ! % ! !
Reference(s)
EIA PN-2388
<cr>
(num)
To Next Page
Loading...
