MC55 AT Command Set
12.20 AT^SMGO
s
m
obil
e
MC55_ATC_V01.05 Page 349 of 469 2/10/04
Confidential / Released
Parameter Description
SMS overflow presentation mode
[0]
(&F)
disable
1 enable
SMS overflow status
0 space available
1 SMS buffer full (The buffer for received short messages is
<mem3>. See
AT+CPMS.)
2 Buffer full and new message waiting in SC for delivery to phone
Notes
• Incoming short messages with message class 1 (ME specific short messages) or class 2 (SM specific short
messages), see
<dcs> in GSM 03.38, will be stored either in ''ME'' or in ''SM'' storage. Therefore the
"
^SMGO:2" indication could occur, without issuing the indication "^SMGO:1" before. The indication "^SMGO:1"
means that both buffers (''ME'' and ''SM'') are full.
• For more information regarding SIM and ME specific message classes refer to
<dcs> and the following spec-
ifications: GSM 03.38 and 3GPP TS 23.038 .
<n>
(num)(&W)(&V)
<mode>
(num)(&V)
To Next Page
Loading...
