Siemens MC55 - Page 386

MC55 AT Command Set
15.7 AT^SPBG
s
m obil e
MC55_ATC_V01.05 Page 386 of 469 2/10/04
Confidential / Released
numbers assigned to the entries' positions in the alphabetical list.
EXAMPLE 2
Using AT^SPBG with <RealLocReq>
- First, run the test command to find out the range of phonebook entries stored in the active phonebook:
TA returns the number of entries in the format:
where 33 is the total number of entries in the active phonebook storage.
- Now, run the write command to display the phonebook entries by alphabetical order. It is recommended
to enter the full range to obtain best results.
Use parameter
<RealLocReq>=1 in order to obtain the entries' location numbers.
TA returns phonebook entries by alphabetical order:
- The numbers at the end of each line are now the memory locations in the phonebook and can be used for
dialing or editing phonebook entries:
Read out phonebook location 27.
- This entry can now be edited with
AT+CPBW.
AT^SPBG=?
^SPBG: (1-33),20,17
AT^SPBG=1,33,1
^SPBG:1,"+999999",145,"Arthur",27 ^SPBG:2,"+777777",145,"Bill",6
^SPBG:3,"+888888",145,"Charlie",15 .........
AT+CPBR=27
+CPBR: 27,"+999999",145,"Arthur"