Siemens MC55 - Page 388

MC55 AT Command Set
15.8 AT^SPBS
s
m obil e
MC55_ATC_V01.05 Page 388 of 469 2/10/04
Confidential / Released
you find entries starting with matching characters. However, do not use the listed index numbers to dial out
with
ATD><mem><n> or to modify entries with AT+CPBW.
• To access an entry found with
AT^SPBS for editing or dialing, enter AT^SPBS with the parameter <RealLo-
cReq>
=1. Then extract the "real" location number of the entry from response parameter <location> and
use this "real" location number with
ATD><mem><n> or AT+CPBW.
See examples below.
Parameter Description
1 To make a step forward in the alphabetically sorted phonebook.
2 To make a step backward in the alphabetically sorted phonebook.
1...maxindex The index in the sorted list of phonebook entries that identifies the first entry
displayed.
The value of
<index-a> is determined by the value of the <internal-
counter>
and by parameter <value>.
After a write command has terminated successfully with "OK", the value from
parameter
<index-a> is saved and retained as the new <internal-
counter>
value.
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the second entry
displayed.
<index-b>= (<index-a>+1).
Mind after the last record of phonebook, the first entry follows.
1...maxindex The index in the sorted list of phonebook entries that identifies the third entry
displayed.
<index-c>= (<index-b>+1).
Mind after the last record of phonebook, the first entry follows.
string type phone number in format specified by
<type>.
the number parameter may be an empty string.
type of address octet
145 dialling string
<number> includes international access code character '+'
<value>
(num)
<index-a>
(num)
<index-b>
(num)
<index-c>
(num)
<number>
(str)
<type>
(num)