MC55 AT Command Set
2.13 AT^SCFG
s
m
obil
e
MC55_ATC_V01.05 Page 60 of 469 2/10/04
Confidential / Released
EXAMPLE 2
Usage of "URC/Ringline" and "URC/Datamode/Ringline":
OK
AT^SCFG="Audio/AMR","disabled"
^SCFG:"Audio/AMR","disabled"
AMR is disabled for any operator.
OK
AT^SCFG="Audio/AMR","23405"
^SCFG:"Audio/AMR","23405"
AMR is disabled for any operator, but enabled for
operator "23405".
OK
AT^SCFG="Audio/AMR","23203"
^SCFG:"Audio/AMR","23405","23203"
AMR is disabled for any operator, but enabled for
operators "23405" and "23203".
OK
AT^SCFG="Audio/AMR"
query parameter "Audio/AMR"
^SCFG:"Audio/AMR","23405","23203"
OK
AT+CSCS="GSM"
Switch to GSM character set.
OK
AT^SCFG?
Query all parameters.
...
^SCFG:"URC/Datamode/Ringline","off"
URCs while TA-TE link is reserved will be indicated
by BREAK.
^SCFG:"URC/Ringline","local"
URCs on this interface will be indicated by RING line
associated to the interface (e.g. RING0 for ASC0).
...
OK
AT^SCFG="URC/Datamode/Ringline","on"
^SCFG:"URC/Datamode/Ringline","on"
URCs while TA-TE link is reserved will be indicated
by an activated "local" RING line.
OK
AT^SCFG="URC/Ringline","asc0"
^SCFG:"URC/Ringline","asc0"
URCs on this (!) interface will be indicated by an acti-
vated RING0 regardless whether or not the TA-TE
link is reserved.
OK
AT^SCFG="URC/Datamode/Ringline","off"
^SCFG:"URC/Datamode/Ringline","off"
URCs on this (!) interface will be indicated by an acti-
vated RING0 if TA-TE link is not (!) reserved and by
BREAK if TA-TE link is reserved.
OK
AT^SCFG="URC/Ringline"
Disable any RING line indication for URCs on this
interface.
^SCFG:"URC/Ringline","off"
OK
To Next Page
Loading...
