Siemens SIMATIC PCS 7 Configuration Manual

Procedure
The following steps demonstrate how to compile the OS:
1. Select the "Compile" command in the context menu of the OS project.
2. Click "Next".
3. Check that the configured network connections AS1 and AS2 are selected. In this case,
"Symb. Verb." is selected as the subnet type and "Named Connections" as the WinCC unit.
Compiling and downloading
9.4 Compile OS
Compendium Part A - Configuration Guidelines (V8.2)
196 Configuration Manual, 08/2016, A5E38166869-AA

Siemens SIMATIC PCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7
Category	Control Systems
Language	English